protrusion of the plaster layer

Posted by Liu Yi over 6 months ago

deformation. (2) should be prepared in advance, bars, wooden pegs, wooden or barbed nail vertical door window frame, and nail bead on the door and window frame. (3), location, type, elevation, doors and windows to see the door window frame on the drawing up door window frame box in front of the door open specifications, direction, door and window frame is flat, flat or vertical wall in the middle, according to vertical export. (4), door and window frame should pay attention to the lower pull line, rod fixed on wooden pegs. (5) to use the vertical frame for straight line hammer crane, and the masonry walls at any time check whether there is any tilt or move. 2, after the cock window (after plug) (1) the number of dimensions, and to check the verticality of wooden door and window opening plug door and window frame before, if there is a problem, should be repaired. (2) the window frame using nails fixed in the walls of the embedded block, the fixed point of each side should be not less than two, the spacing should be less than 1.2m. (3) in the hole of the doors and windows at the same time, should be left out of the window frame take the head (the upper and lower ends of the window frame sill out its part) gap in the window frame adjustment in place, sealing the gap. When limitation, window frame can not leave go head, should take credible measures a door or a window frame fixed in the wall block. (4) the door and window frame should pay attention to the horizontal line. The doors and windows of a multi-storey [url=http://compositefencewholesale.com/deck/6342.html ]latitude parquet decking[/url] [url=http://compositefencewholesale.com/deck/6406.html ]coping for plastic deck stair[/url] [url=http://compositefencewholesale.com/deck/6526.html ]garden fences ireland[/url]