not done all the processes
Posted by Liu Yi over 6 months ago
brush the second time waterproof coating. Note that the first and second times between the waterproof coating need to have a certain time interval until the first pass dry paint can be carried out after the second time, depending on the specific time may be paint. The interval is too short, the effect of water will be greatly reduced, so decoration owners should pay attention to the construction workers have not done all the processes complete. (3) shop protection layer. In order to prevent subsequent damage to the
waterproofing construction, the need to cover the surface of waterproof coating. Protective layer to completely cover the waterproof layer, no omission, solid with the grass-roots level, no cracks, no bubbles, no shedding. (4) closed water test. Closed water test, the highest point of the ground water can not be less than 2 cm, save at least 24 hours, observed no leakage after the calculation of qualified. If leakage, to be redone, and could not careless. 2, waterway transformation (1) replacement valve. Old
waterways are mostly galvanized pipe, easy to rust, fouling and the tube is not beautiful. New home renovation can be part of the transformation of replacement, the old house the best from the main channel within the valve all replaced, because the old bathroom is not great, even if all the replacement works will not increase a lot. In ensuring the safety of water supply under the premise of the decoration used by the pipeline to be as short as possible, but also to facilitate maintenance and aesthetics. (2) open water
[url=http://compositedeckingforsale.com/wood-floor/12307.html]molded composite wood grain interior doors[/url]
[url=http://compositedeckingforsale.com/wood-floor/1380.html]best material for balcony flooring[/url]
[url=http://compositedeckingforsale.com/wood-floor/4548.html]vinyl outdoor porch flooring[/url]