Why is consumer preference for multi-rotor drones it?

Posted by Wangkiky Wangkiky over 6 months ago

We come to power as a driving mode fixed-wing, multi-rotor helicopters and unmanned aerial vehicles to make a comparison. In terms of handling, multi-rotor control is the easiest. It does not need a runway can take off and land vertically, hover in the air after takeoff can. Its principle is simple manipulation, the manipulator operation corresponds to around four remote sensing aircraft, left and right, up and down movement and yaw directions. In autopilot aspect, multi-rotor autopilot control method is simple, the controller parameter adjustment is also very simple. "2 X 36W 7" Spot LED Light Bar Offroad Fog DRL SUV 4WD ATV Boat Truck - 36W Off Road LED Bars - WORK LIGHT" But to grasp the operation of fixed-wing, learning cost is much higher than the clinker want multi-rotor. By fixed-wing aircraft turbine engine or propeller thrust generated by the aircraft as a power forward flight, main lift from the relative movement of the wing and the air. So there must be some distance flight before gliding to require open space. "T10 (W5W 194) - LED Light" Although fixed-wing helicopter to overcome the site requirements, but the operation is still complicated than the multi-rotor, learning cost is not low. And the helicopter flight will produce between channels coupled autopilot controller design difficult, very difficult to adjust the controller. [url=http://www.yitamotor.com/]LED Lights,Car Accessories[/url] #Yitamotor