Specification for wood flooring

Posted by Wangkiky Wangkiky over 6 months ago

"Wood flooring surface Acceptance" Introduction This low energy cost wood plastic composite specification applies to the acceptance of civil indoor wood flooring surface layer is also suitable for laying on the floor due to improper floor state change caused by disputes and arbitration. Specification for wood flooring made it clear that the methods and processes, composite rocking chair plans such as laying wooden floors, keel ends must be nailed or glued real solid, filled with non-cement mortar; do non Blockboard keel; strictly prohibited and wooden flooring other cross-mixing construction interior decoration; indoor use is prohibited at the grassroots level have serious contaminants, such as pitch, phenol. Also stipulates that all wood floors grassroots acceptance, acceptance must reach before the wooden floor surface construction, or does not allow the laying of the surface layer construction; and surface inspection must be completed after acceptance within three days. "Wood floor surface inspection standard warranty" Introduction of this specification, best composite deck board suppliers the use or not to use decoration after completion of the project under normal maintenance conditions, the warranty period of at least one year. If the business has a longer warranty commitments, both supply and demand should be the floor warranty contract. The specification also set clear standards and inspection data processing methods, such as, wood floor deformation should be dimensioned to allow the gap 1.2 mm / block; blackening by area should be 10% / block; find insects floor should be replaced, if the individual floor Not linking piece moth, responsible for the construction of a free replacement flooring, such as a large area of loor by insects belong to the responsibility for maintaining the user's responsibility; composite siding product review crack width should be 0.3 mm, cracking long floor length should be 4%; bubbling, pitting, cracked, wrinkled skin and other press plate surface area should be 5%; crimping press hem upturned should 0.25 mm; plate surface damage such as scratches, hitting marks, burn marks all part of the non-hot normal maintenance by the user responsible for; in addition to strengthening the wooden floor board whitening construction shall be responsible for replacement, the other floors are paint normal wear and tear; laminate flooring and parquet stratified allowed, or should be replaced.