Solid Wood Flooring Installation

Posted by Wangkiky Wangkiky over 6 months ago

Solid wood flooring with its good elasticity, warm and comfortable, natural feel and other characteristics favored consumers. But in the course of solid wood [url=http://wpcdeckwholesale.com/outdoor-deck/9386.html]waterproof wood plastic flooring for kitchens[/url] flooring, and often there will be some "small problems", such as insects, picking joint, noise, dirty plates, painted face, from the dark and warped, etc., the following for these "conditions" to talk about the diagnosis and treatment of methods: moth: because the wood borers in insect bite, the floor surface can often see piles of powder, disturbing. The reason is related to the selection with the floor. To prevent infestation, one purchase kiln dried steam injection process to produce the [url=http://wpcdeckwholesale.com/outdoor-deck/1752.html]composite garden flooring uk[/url] floor, although the price is more expensive, but you have to kill all the eggs in the timber; the second is the careful selection of the keel, where there are Poles or bark , not all. Pa seam: Some floors Guoshu day, there appeared a large gap between the slats. This is mostly related to the floor before laying the moisture content is too high related to high temperature or due to indoor air dry and shrink. Note that when the moisture content for later viewing floor, and after Puwan be timely oiling. Sound: [url=http://wpcdeckwholesale.com/outdoor-deck/6802.html]wholesale composite porch railing[/url] flooring because of the quality is not high, when people will move above gave a groan, hear uncomfortable. Therefore, we must pay attention to the keel between the ground floor and keel is firmly bonded with the appropriate number and length of the nail. At the same time, to prevent the keel spacing is too large or the moisture content is too high, otherwise the drying shrinkage after laying loose, will cause a certain impact. When you use you should consider the selection and deployment of the slats, so that the color of the floor of the Deep, or the gradual transition from a shallow depth. Camber: Some floor Puwan, moisture expansion bagging appears. This is mostly related to the floor surrounding environment, especially basic floor is too moist or water related. To do not bagging the floor, pay attention to three points: 1, at the end of the civil works, laying solid wood floor is not immediate; 2, if the room is in a humid environment, moisture-proof [url=http://wpcdeckwholesale.com/outdoor-deck/1277.html]horizontal wpc fences price[/url] floor is appropriate to lay; 3, at the time of laying, the moisture content of the floor can not be less than 6%. Qi Qiao: This is mainly because there is no formal wood floor drying process caused. Therefore, when installing the floor can be covered with a layer of plastic film below, on the one hand to play against moisture and warped floor action, on the other hand has a certain sound effects. In addition twenty-three days in advance to be placed on the floor laying indoors, the wood adjust to the room temperature, but also can prevent warping.