Smarter compaction equipment from key manufacturers

Posted by Liu Yi over 6 months ago

How to properly store the construction machinery is the knowledge that the construction machinery operator should master. In particular, many construction machinery may not be used for a long time,[url=http://maintenancemachineprice.com//crack-repair/how-to-pave-a-road.html]how to pave a road[/url] or after a certain project is done, the need for these machinery and equipment for a long time. At this time how the construction machinery to the right long-term storage has become an important issue, then how long-term maintenance of construction machinery during the storage period how to maintain these devices so that they do not affect the future use. How to properly store the construction machinery: 1. Should be parked in a dry room. If you have to stay outdoors, you should choose a flat floor and paved with wood. After the shelves covered with a cover cloth. Long-term storage, the need for mechanical maintenance,[url=http://maintenancemachineprice.com//crack-repair/asphalt-spreading-sewing-machine-warehouse.html]asphalt spreading sewing machine warehouse[/url] repair damaged parts, and its thorough cleaning, to maintain a good technical condition. In the arrangement and arrangement of the parking lot, it is necessary to ensure that any mechanical access is not affected by other machinery. The mechanical fuel lever should be placed in the idle position, the joystick placed in the neutral position. 2. The custody of the engine. Remove the cooling water from the engine. ② replace the engine oil. The new oil is usually neutral and does not corrode the engine's metal parts. ③ fuel tank filled with diesel, to avoid fuel tank rust. Preservatives should also be added if conditions permit. ④ During the shutdown period should start the engine once a month, so that the machine for a short distance travel,[url=http://maintenancemachineprice.com//crack-repair/road-irregular-fractured-repairpal.html]road irregular fractured repairpal[/url] so that the parts lubrication to establish a new oil film to prevent rust. It should be noted that the cooling water should be filled before starting, and the cooling water should be discharged at the end. 3. Storage of batteries. ① Remove the battery, the battery placed in the dry and antifreeze. To keep the surface clean and dry, it is strictly forbidden to place conductive objects on the battery. When removing the battery, first cut off the negative line, and then cut off the positive line; installation should first connect the positive line,[url=http://maintenancemachineprice.com//crack-repair/used-asphalt-compactor-for-sale.html]used asphalt compactor for sale[/url] and then connect the negative line. Due to the construction machinery electrical system are negative pole, which is to prevent the disassembly of the battery caused by short circuit. ② lead-acid batteries should be charged once a month. 4. Anti-rust treatment. ① before storage, should be exposed as the outer surface of the anti-rust paint peel the size of the area to determine whether the way with the paint or paint the way to repair the whole machine. ② engineering equipment, such as the scissors of the paver,[url=http://maintenancemachineprice.com//crack-repair/london-cold-milling-machine-price.html]london cold milling machine price[/url] the bucket of the loader, the scraper of the grader, etc., on its metal exposed rust method is smear butter.