Roadtec CP100 sweeper machine for use on road construction sites

Posted by Liu Yi over 6 months ago

New machines for milling and road recycling will offer increased performance and productivity than earlier generation equipment. Higher quality cutting will help contractors achieve smoother surfaces and considerably lower paving costs also. Meanwhile new recycler/stabiliser machines will offer a better cost/m and improve the economics of road recycling for contractors and clients.German firm BOMAG has updated its milling machine line and now offers a range topped by the BM2000/75 and BM2200/75, aimed at the 2m and 2.2m markets respectively. Both machines feature 560kW diesels,[url=http://chipspreadermarket.com/road/6103.html]concrete laser cutting machine[/url] which the firm claims makes these the most powerful mills in their class. Meanwhile BOMAG’s RS500 recycler/ stabiliser has been a key introduction for the firm and offers a high degree of versatility. The 25tonne machine is just 2.55m wide, which makes transporting it by road easier, while the cab can also be lowered to reduce its overhead clearance when being moved from site to site. Power comes from a 373kW Mercedes diesel, with a Tier 4 Final/Stage IV compliant version available for North America and Europe. A novel feature is the new cooling pack design,[url=http://chipspreadermarket.com/Intelligent-roller/7469.html]movable asphalt mixing plant[/url] which has the airflow running from top to the front and is designed to improve cooling while also minimising the risk of dust contamination in the engine compartment.It offers a high degree of versatility compared to earlier generation units and a spokesperson for the firm said, “You can run the machine backwards because the operator seat turns through 180°. The rear of the machine is lighter so if the ground is soft you can reverse in with the lighter end and then drive forwards again for the final pass.” A novel feature is the movable rotor box that provides 300mm of side-shift to both the left and right of the machine. This allows the unit to operate close to walls as well as allowing the rotor to be manoeuvred around obstructions in the machine’s path. Another benefit of this system is that it means recycling work can be carried out where the ground is unstable, as the machine’s weight can remain on firmer terrain. Cross-slope correction is also available for the machine,[url=http://chipspreadermarket.com/road/812.html]asphalt road repair machine bangladesh[/url] which is offered with BOMAG’s own tooling system that has been designed for long wear life as well as ease of change-outs. Caterpillar’s milling machine range meanwhile has seen a major development with the introduction of the PM620 and PM622 models and further developments are planned for this line-up. The PM620 and PM622 share many design features such as the Cat C18 470kW diesel,[url=http://chipspreadermarket.com/road/663.html]asphalt emulsion driveway sealer[/url] and are aimed at the 2m and 2.2m class respectively. This is a key class as it represents some 35-40% of the overall market for milling machines. Other common features include three cutting speeds while the machine has an automatic load control function that optimises performance during operation.