Peanut shells can be developed into green aldehyde-free flooring

Posted by Liu Yi over 6 months ago

Plastic building template is an energy-saving and green products, is following the wood template, the combination of steel formwork, bamboo glued template, all the steel template after another new generation of products. Plastic building template can completely replace the traditional steel formwork, wood template, square wood, energy saving and environmental protection, amortization cost is low. Plastic (PVC), polypropylene (PP), polyethylene (PE), polycarbonate (PC), propylene-butadiene-styrene (ABS), high-density Polyethylene (HDPE) and so on. Plastic building template according to the appearance can be divided into: solid plate, hollow board, buckle ribs, module assembly board, plastic square wood, plastic yin and yang angle. Selection of plastic building template when the detection method: 1, the summer mold deformation and laying the emergence of wave type: take plastic building template samples placed in 70 degrees of hot water for 5 minutes, and then remove the hand to pull mold, see plastic Whether the mold has softened, such as softening the plate is not available. 2, the detection of winter nail cracking and mold mold when the phenomenon of broken: take the plastic building template sample placed 10 degrees below the refrigerator, put 24 hours out, and then use the nail on the edge of the mold from the 10mm place to nail See if the template is cracked, if the crack this template is not available in winter. The above two methods can detect the basic performance of plastic building templates. [url=http://wpcdecksuppliers.com/suppliers/1348.html]composite decking manufacture europe[/url] [url=http://wpcdecksuppliers.com/suppliers/1349.html]how to build a deck around round pool[/url] [url=http://wpcdecksuppliers.com/suppliers/1350.html]plastic interlocking floor deck[/url]