Leveling the ground is very important

Posted by Wangkiky Wangkiky over 6 months ago

Many paved the wood floor owners may encounter this situation, laying flooring company come to your home after they tell you that, "You can not shop home to injustice." This is because if uneven ground, over time there will be an empty sound, warped, take the floor covered with ash and other phenomena, and these problems are not floor quality problems. So workers in general will remind you, before the floor pavement must first solve the "uneven ground" issue. 2 square meters fall within more than 3 mm belong uneven ground According to China National Forest Products Industry Association Flooring Committee is released "White Paper on China to strengthen the quality of the floor," paving the ground for the request, paving the ground to achieve by measuring two meters by foot maximum ground clearance of not more than 3 mm. According to reports, the national construction industry standards for ground leveling the ground for the ground for home improvement are: 2 square meters within the gap> 3 mm, are uneven ground; within 2 square meters drop ≥5 ~ 10 mm, is a serious injustice; within 2 square meters drop ≤ 3 mm, the ground belongs qualified. Shaanxi Provincial Forest Products Quality Supervision Station of Jin Lin Jieshao said that, laying wooden floors are most afraid of uneven ground, how to identify it? We usually use a two meters by foot to carpet-measurement. Namely, in the same position measurement cross direction, if there is more than 3 mm below the foot or even by 5 mm gap, it shows uneven ground, beyond the requirements of the wood floor coverings. Some people will feel 3 mm does not matter much if you put a floor, resulting in the emergence of empty floor ring, lock at the damage, take the gray corner, stepping on the floor like a seesaw-like feel, this time lost big. If the loss due to the owners forced construction, flooring company may not give you compensation. So if the floor is installed, whether it is wood, or reinforced laminate flooring, pre-treatment of the ground are very important. In addition, if the ground is not enough strength, will be able to kick their feet from the ashes, this is what we often say that from the ash. This phenomenon after you install the floor cleaning is very annoying, no matter how clean you are going out of the corner on the floor to take the ash. People walking on the floor pressured to take out all the gray lead from a corner kick and seam position, which is usually due to the ground to find the cause of primary treatment is not in place. Only minor amendments floor mats There are a number of real estate companies cover the house is not very standard, or in the process of renovation since the late slotted caused uneven ground, we must find a skilled bricklayer be re-leveling the ground, you can take the following manner: The actual paving process, according to the thickness of the mattress manufacturers matching different moisture on the ground flatness requirements are slightly different, if the manufacturer in accordance with the standard configuration chosen 2.5-3 mm bottom pad, because a thicker base pad can be slightly corrected flatness of the ground, the ground will be relatively low demands it, but two meters by foot measured maximum ground clearance can not be more than 5 mm, if the manufacturer is about 1 mm optional inferior skids, this requirements will be slightly higher, the thickness of the bottom cushion for correcting the flatness of the ground has been basically does not work, can only play the role of moisture. You can add a small area with a plaster glue Calibrating If the pavement floor flatness requirements are particularly high, it is necessary to do self-leveling process, but the higher cost; suitable for geothermal ground floor leveling. Long Accor floor person in charge of Wang Jin said. For general laminate flooring or wood composite products is concerned, may take on a small area of ​​uneven ground scraping plaster approach to this method the cost of the lowest cost is the main workers' labor charges. Usually a house to spend about 100 dollars you can get, plus gypsum powder 801 glue cost is very cheap, and plaster dries quickly, you can do one day in advance, even in the dry season, the day will do the construction, oil workers , bricklayer, shop floor workers can do. A large area to use cement mortar Larger area of ​​irregularities can use two ways to deal with: one way to advance wipe cement to do in advance, otherwise the cement dry impermeable floor will stay damp problems, affect the service life of the floor. This approach is low cost, the need to complete the bricklayer, floor Dewei, head Jiang Lei recommendations. Another approach is much simpler: the direct use of foreshadowing Po, foreshadowing treasure for correcting the effect of the ground is very good, including ground even after notching is exposed on the ground pipelines can handle perfectly, the key is to let strengthening or flooring foot feeling to maximize improvement can say that it is not inferior to solid wood flooring foot feeling. Construction is simple, shop floor workers to free pavement, higher product purchase costs, probably between 15 and 20 dollars per square meter, according to their needs thickness selection. This approach is also suitable for treating high degree of inconsistency between the tiles and flooring problems, the effect is better. Particular attention in this way is not suitable for geothermal heating. all link: best fencing install new hampshire composite wood deck coatings supplier for curtain wall composite board panel in singapore