Learn about high pressure plunger pump accessories

Posted by Wangkiky Wangkiky over 6 months ago

The high-pressure plunger pump first pressurizes the tap water (with an inlet pressure of not less than 10 bar) with a plunger pump driven by a three-phase motor through a three-pole plunger pump, and then is heated by a fuel (diesel) heater, and finally sprayed by a high-pressure spray gun Out. The outlet pressure of the high temperature, high pressure and high pressure plunger pump is generally 130-200 bar, and the maximum outlet temperature is 90 degrees Celsius. The type of air compressor used in construction uses the principle that air is compressible to achieve high temperature and high pressure of water. The principle that the air compressor does mechanical work to reduce its volume and increase the pressure: the high-pressure water gun for car washing: water is sucked in by the high-pressure water pump, compressed and flows through the high-pressure water pipe at high pressure, and finally shot out by the high-pressure water gun, which controls the water outlet. The flow rate is used to control the size of the dispersion of water, so that a high-pressure water jet can be achieved. The pressure used for car washing does not exceed 8Mpa, generally between 5Mpa~6Mpa. Let me talk about the principle of the high-pressure and high-pressure plunger pump accessories air compressor: the air compressor sucks in fresh air through the suction end into the air chamber (first-level air chamber) It is sent to the air storage chamber for storage, and compressed and discharged to the secondary air chamber for compression. Finally, it is managed and transferred to the tool for use. The power comes from the diesel engine or the electric motor bridge or directly drive the work. Let's talk about the high-pressure water gun configuration for car washing: high-pressure water pump, high-pressure water pipe, high-pressure water gun. Air compressor for construction: driving device (diesel engine or electric motor), air compressor, air bag (air storage chamber) read more: [url=https://www.ht-guide.com/industry-news/Heat-treatment-of-metal.html]Heat treatment of metal[/url] [url=https://www.ht-guide.com/industry-news/Phosphating-heat-treatment-technology.html]Phosphating heat treatment technology[/url] [url=https://www.ht-guide.com/industry-news/large-well-carburizing-furnace-of-maintenance.html]large well carburizing furnace of maintenance[/url]