Floor construction FAQ

Posted by Wangkiky Wangkiky over 6 months ago

Hollowing sound: The reason is not solid wood [url=http://wpcdeckwholesale.com/outdoor-deck/1204.html]composite decking cost per square foot[/url] flooring fixed due mainly wool board and keel, gross floor plate and a small number of nails or staples too strong, sometimes because of the moisture content of the sheet changes caused by shrinkage or glue failure due. Control methods in addition to strict inspection sheet moisture content, adhesive, such as quality, after passing inspection before use, nails should not be too small when installed outside, and shall ensure that nailed, each finished laying a wooden floor, with no sound after the test foot hold one, if the sound should immediately rework. Laying surface uneven: The main reason is the laying of the grass-roots or uneven wood [url=http://wpcdeckwholesale.com/outdoor-deck/900.html]composite decking in sydney[/url] floor deforms due to bagging. In laying the construction, application and acceptance level of foot, keel leveling the surface, if uneven laying skids should be adjusted. Ventilation should be done on a small groove keel. Laying plate margins should stay out of the wall 10 mm ventilation gap. Thermal insulation layer material must be dried to prevent postoperative damp [url=http://wpcdeckwholesale.com/outdoor-deck/1026.html]wall panel prices in Australia[/url] floor bagging. Wood floor surface flatness error should be within 1 mm. Patchwork lax: In addition to the laying of non-standard construction, the difference between the width of the size error and tongue and groove processing quality sheet is also an important reason, in addition to carefully examine the construction quality of the [url=http://wpcdeckwholesale.com/outdoor-deck/1244.html]simple bench seating for do it yourself[/url] floor, the plum should install tongue and groove tiles in the front plate nail cramp, with the floor module slot die was unanimously after nailing.