Composite solid wood floor maintenance principles

Posted by Liu Yi over 6 months ago

  Part1: large area soaking   First, solid wood and parquet a large area soaked in water treatment   Solid wood flooring damp coefficient of expansion is large, once the water vapor into the floor, it will cause bending deformation. So the floor if there is a large area soaked in water, it is difficult to dry the surface through the water to solve. It is best to pry the floor to reinstall. It is recommended to promptly notify the floor of the after-sales service,[url=http://woodplasticcompositedecking.com/wpc/wpc-decking/363.html]clearance on composite flooring for decks[/url] require manufacturers to provide solutions.   The correct approach: First of all, pry the floor carefully, as soon as the surface of the water dry, and then press the "well" shape overlay placed, the use of the weight of the floor to prevent the occurrence of deformation. Place the floor when the attention of the negative side up, in addition, these floors should be placed in ventilated place dry, can not suffer from sun exposure.   Although the coefficient of expansion of the composite floor soaked in water without solid wood flooring so high, but also need to be handled carefully. For large areas of flooding, and solid wood flooring similar to the best as soon as possible around the composite floor skirting removed, and Alice out of the floor soaked, with bricks or other things to raise the floor to "well" word stack Put dry. Generally good quality of the composite floor,[url=http://www.environmentallyfriendlyflooring.com/product/3932.html]domestic architectural cladding[/url] can be re-paved in the dry.   Second, strengthen the floor a large area soaked in water treatment   If the time to strengthen the floor soak no more than 12 hours, you can move the furniture on the floor, with a dry cloth to dry all the floor surface water stains. And then remove the floor of the base line, exposing the expansion joints, by the expansion of the water vapor drained, according to the amount of water, usually 7 days to 15 days or so dry, if not restored after 15 days should be considered re- Replaced. Third, a large area soaked floor treatment precautions   1, soak for too long the floor should be replaced directly   If the floor soaked in water for too long, or even Alice has been the case of deformation, it is best to pry the floor off, re-paving the new floor. Some owners in order to save money, directly from the arched part of the polished, and then brush on the paint, this approach just for a while, because the thickness of the floor should not be different,[url=http://www.environmentallyfriendlyflooring.com/product/3026.html]better designed shadowbox fence[/url] different post-depression is prone to.   2, dry the floor after the re-pavement precautions   Large areas of soaked the floor was prying dry, if there is no big problem can be re-paved. However, it must be noted that the re-pavement before the need to ensure that the ground dry. If there is a keel, and all keel need to dry; and if it is a direct shop, and so need to re-gushed out of the cement floor white is appropriate.