Comparative test results flooring

Posted by Wangkiky Wangkiky over 6 months ago

In accordance with national standards, to continue to allow a small amount of flaking, does not affect use. 6, surface contamination and strong, easy to clean and care. Surface resistance to pollution is mainly reflected in the use of solid wood flooring surface contamination resistance,[url=http://choosenewdeck.com/new-deck/324.html]patio chair composite plank[/url] and it is the film about the quality of the floor, by surface stains can easily wipe clean to measure. Test contaminants including coffee, color wine, vinegar, soy sauce, edible, red ink, lipstick, nail polish, ink, black shoe polish and 5% aqueous sodium carbonate and the like. The comparative test of 22 brands parquet samples by testing, surface contamination after all traces of pollution, contamination-resistant surface good performance. [url=http://choosenewdeck.com/new-deck/672.html]diy wooden bench with back support[/url] 7, static bending strength, strong anti-breaking ability. Static bending strength and elastic modulus is an important indicator of the mechanical properties of wood composite flooring. MOR mainly reflected the ability of the floor itself against bending failure, the higher the static bending strength index value, its ability to resist bending failure of the stronger; the level of the detected value of the modulus of elasticity, toughness is good or bad floor reaction. National standards set forth, [url=http://timberoutdoordeck.com/eco-deck/573.html]short garden fences[/url] the average detection values ??MOR should not be less than 30MPa, the minimum should be not less than 24MPa;